Most people just focus on the interior and exterior cleaning of the vehicle while washing them and they forget to clean the undercarriage of the car. Car undercarriage cleaning is important because when our cars pass through muddy, dirty, and all sorts of roads, dirt and grease stick on the car undercarriage and start to rust. You need to focus on the cleaning of undercarriage of the car because it ensures the car’s safety and long life. Here step by step complete guidance about car undercarriage cleaning is mentioned what you need to know.
Step 1: Set Car Position:
Before cleaning the car undercarriage, you need to set the position of the car. You need to get under the car for cleaning or you can lift your car up by using steady jacks. Lifting the car up is the best way to clean the car undercarriage properly and remove grease and rust stains. While setting the position of the car you should take safety precautions.
Step 2: Degrease the Entire Undercarriage:
Before washing the car you need to coat the entire car’s undercarriage with a degreaser because all engine parts on the front and electronic parts of the undercarriage contain excess oil and grease. To remove the excess oil you need to spray a degreaser on these areas and leave it for 20 minutes prior to the wash. There are various degreasers are available in the auto market and you can also purchase it online store for easy wash.
Step 3: Pressure Wash Undercarriage:
When the degreaser work has been done, then spray the undercarriage with car shampoo and wash the car with the pressure washer and ensure that the degreaser is removed completely. A pressure washer is the best tool to get off the dirt, oil, and grease from the car. You also need to choose the best pressure washer to clean the car.
Step4: Remove Tar:
After the pressure wash, if grease and oil stains remain, you need to use tar remover. Tar remover is an excellent cleaning product for removing scars, oil and fuels stains, contaminants, and stubborn tar spots and ensuring the proper cleanliness of the undercarriage of the car. You can buy a good quality tar remover from any car dealership or online.
Step 5: Blow-Dry:
After the complete car, you need to dry entirely undercharge, if you want to protect it from rust. You may dry everything by using the blow-dry method. The heated air drains the excess water from the undercarriage area of the car like suspension bushes, steering racks, and ABS sensors.
Step 6: Lubricate Undercarriage:
And the final step of cleaning is to lubricate the undercarriage of the car. You need to purchase a good quality lubricant from an online store or market. The car lubricant provides softness and protects all the rubber parts of the car undercarriage. It also gives an excellent finishing to the car.
